|
(Set consist of 2 rings) Completely CNC machined from solid stock. These rings are machined in pairs and are serial numbered as machined and are absolutely matched to within our standard tolerances of .005" of center line of our base. We can also supply 2 sets as absolutely matched with serial number such as 0080, 0081, 0082, etc. which ever sequence. These same rings can also be supplied with a matched base which both has been inspected to be within 1/2 of our standard tolerances and then serial numbered accordingly at a nominal fee. This is not to say that our standard rings are as close if not closer than any thing else on the market. We are just trying to give our customers a matched set that they can be even more proud of. ( Recomended torque to base is 55 to 65 inch lbs. Recomended torque to cap 20 to 30 inch lbs. The closer the torque factor , the closer the repeatability. ) From the top of the base to the center line of the scope: .835. In most cases our standard rings will clear a 50mm objective bell. Ken Farrell Inc. 660-438-9456 660-438-9662 fax kenneth1@iland.net e-mail
|
