Try our new free targets!
Product Instructions and Ring Chart
Scope Mounts, Rings, and other rifle related
products for tactical, long range, law enforcement, military and hunters !
Note: Products do not have white lettering. White lettering on products is for
photo purpose only.
Not all products are linked to the front page. You will need to do a search.
FREE Shipping within the United States via USPS Priority Mail. Out of the country shipping as well as any other shipping method will be charged accordingly.
*** NEW PRODUCTS ***
SCOPE RING LEVEL : The CLR-VU Scope Ring Level mounts directly to the top of the Farrell Rings only. All Farrell Rings are Level Ready, except the older production. For $10.00 + the cost of the level, the rings with the flat on top of the cap can be sent to the factory for Level installation. If a shooter uses a slight cant, the ring cap can be rotated to the cant that is being used. The CLR-VU Scope Ring Level comes in black or silver.
ADJUSTABLE 0-70 MOA SCOPE MOUNT : Our New Adjustable 0-70 MOA Light Weight Mount
Features
• Main components made from 7075-T6 hard anodized high tensile light weight aluminum.
• 0 to 70 pins included will be in 10 moa increments. ( 0, 10, 20, etc. )
• Pins are available in .001 increments. Any impact point can be calculated knowing the bullet ballistics with little or no scope adjustments.
• Brass adj screws for no side movement.
• Anti-Rock Picantinny Top for positive ring placement.
• Heat treated 17-4PH stainless steel pins
• Quick Release Thumb Wheel for rapid pin change.
1) Release thumb wheel
2) Lift base and scope
3) Pull the moa pin out
4) Insert new moa pin
5) Retighten Thumb Wheel
6) No dissasembly required to mount to receiver.
You now have a different moa in your base.
.
NICKEL PLATING : For the shooter who wants the stainless steel look, we are now offering nickel plating to our STEEL mounts and rings.This option is available for $ 15.00 + product. Please allow aprox. 1 week for processing.
Features:
-
All of our Rifle Accesories are machined from solid stock with exceptional quality control.
-
SATISFACTION GUARANTEE! - Return to factory
for refund or replacement.
-
CUSTOM SCOPE BASES FROM $175.00 TO $195.00.
-
Each set of scope rings are perfectly matched.
-
Mounts are available in steel, aluminum, and hardline.
-
Steel Rifle Related Products in Matte Black finish
only.
Our mounts are completely CNC machined, not cast, extruded, or formed.
-
All mounts are left and
right-handed.
-
Rifle scope mounts are true 1913 picatinny specs.
-
Barrell vises and custom jaws available
-
Quality products since 1966.
- MOUNTING FARRELL SCOPE BASES AND RINGS- These bases are machined to be flat and parallel to .002 or less. If they are mounted properly and without any stress there should be no reason to lap the rings upon installation. For those who wish to mount and maintain this flatness, we've provided a bedding groove (a first) on the underside of the mount to allow a dense application of epoxy.
- We use custom heat-treated screws with a 45 degree angle head. Rings can be matched to bases with the same serial number for a nominal fee.
- Farrell BBL Vises are designed to be lightweight and very strong with heat-treated studs, nuts, and washers. Custom jaws by request.
-
- ALL FARRELL RIFLE RELATED PRODUCTS ARE MADE IN FACTORY LOCATED IN WARSAW, MISSOURI.
- Contact us at kenneth31@earthlink.net
|
